This wax solution is an additive that turns a Gelcoat product into Topcoat ( flowcoat )

Gelcoat is designed to have an inhibited cure which means it will cure tacky, this is because its intended for use with moulds. You would apply a gelcoat as a first layer to a mould and then add re-enforcements such as fibreglass to it. When the object is demoulded the gelcoat is now the outer surface.

If you want to use Gelcoat as POST MOULD repair or for applying to a fibreglass object then you DON'T want it to cure tacky but touch dry.

This is where the wax solution is used. By adding the wax solution to the gelcoat at 2% ratio it turns the gelcoat into topcoat and it will CURE TOUCH DRY. 

Mixing should be by weight at a ratio of 2% ( weight x 0.02) 

Examples

100g of Gelcoat - add 2g of wax solution 

250g of Gelcoat - add 5g of wax solution

500g of Gelcoat - add 10g of wax solution

Note

Gelcoat in listing picture is for illustration only- this listing is for the WAX SOLUTION only.